AMCOL Solutions for CNC Machining

Precision Lubrication for Near Dry Metalworking

AMCOL High Performance Precision Lubrication Systems, also referred to as Minimum Quantity Lubrication (MQL) systems, are designed to replace conventional flood lubrication in sawing and machining of metals.

MQL is a combination of extremely accurate dispensing equipment matched with high performance lubricant chemistry.

AMCOL Lubricants are applied to the machine tool just prior to the cut or through the tool at the point of cutting. The result is a near dry cut with dry chips and a dry part. In many applications tool life and surface finish are enhanced.

Coolants for CNC Machining

CHARCOOL water dilutable coolant concentrates are designed for use in flood-type machining of metals.

CHARCOOL is designed to provide maximum tool life and surface finish, low odor in use, long sump life, and rust protection for parts and machinery.

AMCOL offers a range of synthetic and semi-synthetic chemistries that have shown extremely good results in machining steel, stainless steel, aluminum, titanium, and other hard to machine alloys.

Mobile Coolant Reclamation

The SF160 SURECLEAN Mobile Coolant Reclamation System is a high-speed filtration and skimming apparatus that quickly removes suspended solids and tramp oils from water-based coolants.

The AMCOL SF160 SURECLEAN Coolant Purification System is a stand-alone system that is rolled up to your machine and can complete the process in less than 30 minutes.

The SF160 SURECLEAN Coolant Purification System is best utilized where conventional filtration is not possible due to space constraints, cost, and other machine-specific limitations.