Corrosion Inhibitors and Coating Systems
3200 & 921 DS CANT RUST
Electronic Tube Coating Systems
Model 3200S
Cutting of Steel Profiles
6000E & CANMIST
Tube Mill & Roll Forming Coolants & Filtration
3076 & 2200 CHARCOOL
Anti-Seize for Spindles
62 RP SPINDLE LUBE
3200S Series
- Used to Apply Rust Preventatives Onto Continuous Profiles
- Applies interim storage coatings to the outside diameter of steel tubes and exposed surfaces of simple roll-formed profiles
- Works Best with the 921 DS CANT RUST series of Rust Preventatives
- Promotes consistent and predictable coating of profiles
- Collects Overspray for Potential Reuse or Segregation and Disposal
- Minimizes cross-contamination of mill coolants and rust preventatives
- Spray Nozzles Surround the Profile on all Sides
- Converts Easily from One Size to Another
- Standard in 4, 6, or 8 points of spray, injectors can be turned on/off in groups
- Integrates and Easily Installed Between the Mill and Cut‐off
- Systems include a spray box, system controls, a liquid reservoir, and related mounting
921 DS CANT RUST
Water Displacing Corrosion Preventatives
• Corrosion Preventative Used to Coat and Protect All Types of Rolled Steel
• Inhibits rust, staining, and corrosion during indoor warehouse storage and interim transit
• Is Best Applied using the 3200 In-line Spray Applicator
• One gallon of CANT RUST typically covers up to 10,000 sq. ft. with a light coating
• Wets Out to a Light Film
• Is easily removed for painting or plating
• Residual Film Stays Soft and Oily
• Easily removed using acid or alkaline detergent cleaners, or mineral spirits
• No Solvent Carriers
• Often less per gallon than other products. Many users also cite reduced consumption
• Three different Versions are Available
• Short and Medium-term coating along with maximum rust protection in high humidity
Proven Technology, Refined Over Decades.